Control Arm Bushing Replacement Video

Post Reply
Shipkiller
Lifer
Lifer
Posts: 4143
Joined: Sat Oct 27, 2007 11:54 pm

Control Arm Bushing Replacement Video

Post by Shipkiller » Thu Jun 11, 2009 11:33 pm

Here is another set of videos from BMP Design.

Again, this is for the E46, but most of the parts are the same for the Z4.

Control Arm Bushing Failure Video.
Watching that wheel move is a little scary...

[youtube]<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/83Pw3V8pMeI&hl ... ram><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/83Pw3V8pMeI&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>[/youtube]


How to replace.
[youtube]<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/LXoBRKQeT44&hl ... ram><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/LXoBRKQeT44&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>[/youtube]
Drives 2008 Z4MC (His) & 2003 Z4 Roadster (Her's)

big_al
Member
Member
Posts: 65
Joined: Wed Aug 26, 2009 7:26 pm
Location: Bristol

Re: Control Arm Bushing Replacement Video

Post by big_al » Thu Jan 16, 2014 6:12 pm

These videos do still seem to exist - not sure why the links don't work, but I fished these from the source of the posts...

www.youtube.com/v/83Pw3V8pMeI

www.youtube.com/v/LXoBRKQeT44

User avatar
fixit man
Member
Member
Posts: 858
Joined: Thu Oct 14, 2010 12:25 pm
X-Box live gamer tag: meandminime

Re: Control Arm Bushing Replacement Video

Post by fixit man » Thu Jan 16, 2014 6:34 pm

mine didn't come off that easy, I had to use an air Chisel, took about 30 minutes each side just to get the damn thing off the control arm, a puller would have been nice :)

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests