Hi all,
I just changed all shocks with Bilstein B4 on my 03' 3.0 E85
And I think rear axle it is much more stiffer than stock shocks so I'm wondering where's the problem.
When I looked for rear bump stops I thought E46 might use the same one so I ordered them. (like this https://goo.gl/HSifH6)
I just found out it's not the same one and E85 bump stops are smaller than E46.
Is that the reason why I think rear axle is stiffer than before?
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Rear bump stop
-
- Member
- Posts: 205
- Joined: Fri May 13, 2016 8:57 pm
Rear bump stop
I recently had the springs and dampers replaced on my 2007 Coupe- bilstein b4 as well- and I got genuine BMW bump stops as they are not expensive and you know you're getting the right size part as well.
-
- Newbie
- Posts: 2
- Joined: Sun Mar 13, 2016 4:41 pm
Rear bump stop
I'm just wondering the OEM one on ebay is around 30USD per damper isn't that a lil expensive compare to front ones?
-
- Member
- Posts: 205
- Joined: Fri May 13, 2016 8:57 pm
Rear bump stop
I got mine from BMW main dealer for £15 each (that included the protection collar). The front axel were £12.92 each
If your original bump stops show no damage/brittleness then you could just re-use those.
If you're in US, perhaps they charge a bit more!
If your original bump stops show no damage/brittleness then you could just re-use those.
If you're in US, perhaps they charge a bit more!