Hi folks, I guess this has been touched upon before. I'm fitting some Corbeau RRS seats to my 2007 facelift z4. Do I need one of the adapters to take the place of the seat occupancy sensor, if so could somebody recommend one? I see there are various types on e bay. Secondly anyone have any idea which wires on the underseat connector relate to the heated seat function - as my new seats have that capability.
Many thanks for your assistance.
Here's hoping the sun comes back soon, so I can get the roof down again : )
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Third party seats - occupancy sensor passenger seat
-
- Member
- Posts: 107
- Joined: Sat May 13, 2017 5:33 pm
Third party seats - occupancy sensor passenger seat
Z4 Facelift, 3.0si auto, silver convertible - now gone, but remembered fondly
Z4 E89 20i M Sport Sapphire Black
Z4 E89 20i M Sport Sapphire Black
- pHilli0
- Member
- Posts: 579
- Joined: Thu Apr 30, 2015 11:21 am
- Location: Bedford
- Contact:
Third party seats - occupancy sensor passenger seat
Great timing. I am also about to fit Corbeau Revolution seat to my E86. Similar thoughts on what to do re occupancy sensors, any airbag lights that might come on following the replacement of the M sport seat. ATM I am only swapping the driver seat to make sure I get it all right and I am happy with the seat.Chris22091966 wrote: ↑Thu Jun 22, 2017 9:04 am Hi folks, I guess this has been touched upon before. I'm fitting some Corbeau RRS seats to my 2007 facelift z4. Do I need one of the adapters to take the place of the seat occupancy sensor, if so could somebody recommend one? I see there are various types on e bay. Secondly anyone have any idea which wires on the underseat connector relate to the heated seat function - as my new seats have that capability.
Many thanks for your assistance.
Here's hoping the sun comes back soon, so I can get the roof down again : )
2006 Z4 ///M Coupe || Schrick CSL Cams | Eventuri | Brembo 6/4 & Pagid RS-29s | KW V3s | H&R ABRs | Stromung | ARC-8s | Corbeau Revolution | OEM Strut | ZHP | Stubby | CDV | RTAB | Evolve Map ||
http://www.phillynchracing.com/index.php/blog/
http://www.phillynchracing.com/index.php/blog/
-
- Member
- Posts: 107
- Joined: Sat May 13, 2017 5:33 pm
Third party seats - occupancy sensor passenger seat
Ok - you don't need to worry about an occupancy sensor for the drive's side. I used a Planted technology floor bracket and bought independent runners off Amazon. I did get some supplied by Corbeau, in fact TW sets, both of which weren't long enough.
here is the link to the ones I bought off Amazonia:
https://www.amazon.co.uk/gp/product/B00 ... UTF8&psc=1
These sliders were perfect.
All questions just pm me.
Regards
Chris
here is the link to the ones I bought off Amazonia:
https://www.amazon.co.uk/gp/product/B00 ... UTF8&psc=1
These sliders were perfect.
All questions just pm me.
Regards
Chris
Z4 Facelift, 3.0si auto, silver convertible - now gone, but remembered fondly
Z4 E89 20i M Sport Sapphire Black
Z4 E89 20i M Sport Sapphire Black
- pHilli0
- Member
- Posts: 579
- Joined: Thu Apr 30, 2015 11:21 am
- Location: Bedford
- Contact:
Third party seats - occupancy sensor passenger seat
Thanks Chris for the infoChris22091966 wrote: ↑Mon Jul 24, 2017 11:59 am Ok - you don't need to worry about an occupancy sensor for the drive's side. I used a Planted technology floor bracket and bought independent runners off Amazon. I did get some supplied by Corbeau, in fact TW sets, both of which weren't long enough.
here is the link to the ones I bought off Amazonia:
https://www.amazon.co.uk/gp/product/B00 ... UTF8&psc=1
These sliders were perfect.
All questions just pm me.
Regards
Chris
I have bought
Corbeau Revolution XL Seat
VAC Floor Mounts
https://store.vacmotorsports.com/vac-fl ... -p559.aspx
Sparco Side Mounts
http://www.demon-tweeks.co.uk/performan ... ide-mounts
Sparco Seat Runner Kit
http://www.demon-tweeks.co.uk/top-100/p ... r-kit-each
I am hoping that combination will fit?
I know the floor mounts are good as many other have used them.
Then the seat runners attach to the floor mounts. No idea on the length compared to the ones you linked.
Then the side mounts to the seats.
2006 Z4 ///M Coupe || Schrick CSL Cams | Eventuri | Brembo 6/4 & Pagid RS-29s | KW V3s | H&R ABRs | Stromung | ARC-8s | Corbeau Revolution | OEM Strut | ZHP | Stubby | CDV | RTAB | Evolve Map ||
http://www.phillynchracing.com/index.php/blog/
http://www.phillynchracing.com/index.php/blog/