What do i need for the Key Memory Functions

Daaaavvveee · Post by **Daaaavvveee** » Sun Dec 21, 2014 10:44 pm

Right, I want to look into the coding and put things like auto door locking, triple indicator on tap etc etc.

What do i need to do this?

Can i use a MAC? Or a VM within a MAC?

Anyone have any advice for it etc?

Cheers

JayEmm · Post by **JayEmm** » Sun Dec 21, 2014 10:55 pm

I imagine there is a way to do it at home but not sure of an official one...

I got my dealer to do it when the car was in for a service. If you have a local friendly indie with the facilities they'll do it for beer money I'm sure.

Post by **srhutch** » Mon Dec 22, 2014 7:51 am

You need SSS on a windows based machine. Don't think it will work on a Mac using a VM as there are two programs that need to run outside of the VM. If you can boot into windows instead of iOS then install VMware you might be ok.

You can get the program with interface on the bay for about £25. Loos for BMW DIS, SSS, INPA.

jaq03 · Post by **jaq03** » Mon Dec 22, 2014 8:34 am

You can use VMware, but then you have to use virtual machine in a virtual machine

I have a mac and have done it, I had XP virtual machine in mac enviroment and started win srv2003 into it. But it was very slow.

Another way is to use bootcamp to start windows and then use virtual machine.

Or if you can use BMWhat software in your phone or tablet. If you have face lift model, you need Bluetooth adapter for Android or Wifi adapter for iOS device.
This option is easier to use than those PC based softwares.

mac27040 · Post by **mac27040** » Mon Dec 22, 2014 8:39 am

Your if you fancy a drive up to leicestershire I'll code your car for you.

Stratts · Post by **Stratts** » Mon Dec 22, 2014 8:47 am

I was playing with this last night funnily enough.

Do it all on NCS Expert, avoids the need for any VMware as you run it straight from Windows. There's even a guy on YouTube doing exactly that on a Mac, so it's much easier.

Daaaavvveee · Post by **Daaaavvveee** » Mon Dec 22, 2014 2:56 pm

Cheers everyone for the replys, i may look into the bmwhat app. I think its around £35. Can that code like normal then?

Ross57 · Post by **Ross57** » Mon Dec 22, 2014 5:54 pm

Been thinking about the BMWhat app myself, but not sure if I can use the Bluetooth adapter or would I need to get K line cable, it's a Z4 3.0 2003

mac27040 · Post by **mac27040** » Tue Dec 23, 2014 11:45 am

please check out what can be done with the BMWhats app as is states on their website E85 "in some cases only a few ECUs can be diagnosed, no coding"

Z4-forum.com

Z4-forum.com

What do i need for the Key Memory Functions

What do i need for the Key Memory Functions

Re: What do i need for the Key Memory Functions

Re: What do i need for the Key Memory Functions

Re: What do i need for the Key Memory Functions

Re: What do i need for the Key Memory Functions

Re: What do i need for the Key Memory Functions

Re: What do i need for the Key Memory Functions

Re: What do i need for the Key Memory Functions

Re: What do i need for the Key Memory Functions