Trying to install front camera and boost sensor wiring for new ID4 Motion instrument cluster..
Any ideas of where / how to get from the cabin to the engine bay?
https://youtu.be/nB-3yyejphE?si=Q9o1CTNW-CTexoiX
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
How do you get from the cabin to the engine bay?
- B21
- Lifer
- Posts: 5538
- Joined: Tue Oct 05, 2021 7:15 pm
- Location: In my Banana Yellow Space Shuttle...somewhere over Southern Caledonia
How do you get from the cabin to the engine bay?
We choose to go to on with this endeavour at this time and do the other things, not because they are easy, but because they are hard…
A very modified Atacama Yellow 35is
A very modified Atacama Yellow 35is
- paddy wright
- Lifer
- Posts: 7672
- Joined: Sun Jan 06, 2008 1:00 pm
- Location: south yorkshire
How do you get from the cabin to the engine bay?
There’s the hole through where the sound generator goes in I believe.
Z4 2.2 sterling grey,Msport seats,retrofit cupholders,cruise,footwell lights,sound gen and mfsw,18"ellipsoids,xenons+light washers,ZHPknob,folding mirrors,3"stubby,update wheel caps,gateway300 ipod, wind deflector to keep the wife happy!
- enuff_zed
- Lifer
- Posts: 14988
- Joined: Wed Oct 26, 2016 11:05 am
- Location: Attleborough, Norfolk
How do you get from the cabin to the engine bay?
If you find a grommet that a loom goes through then take the outside part of a bic pen, push it through the grommet then feed the wire through.
Saves all the hassle with the wires folding back on themselves.
Of course, once through the grommet, take the pen off the wire again.
Saves all the hassle with the wires folding back on themselves.
Of course, once through the grommet, take the pen off the wire again.
- B21
- Lifer
- Posts: 5538
- Joined: Tue Oct 05, 2021 7:15 pm
- Location: In my Banana Yellow Space Shuttle...somewhere over Southern Caledonia
How do you get from the cabin to the engine bay?
I’ll try and find a grommet..enuff_zed wrote: ↑Wed Jan 03, 2024 5:00 pm If you find a grommet that a loom goes through then take the outside part of a bic pen, push it through the grommet then feed the wire through.
Saves all the hassle with the wires folding back on themselves.
Of course, once through the grommet, take the pen off the wire again.
We choose to go to on with this endeavour at this time and do the other things, not because they are easy, but because they are hard…
A very modified Atacama Yellow 35is
A very modified Atacama Yellow 35is
- B21
- Lifer
- Posts: 5538
- Joined: Tue Oct 05, 2021 7:15 pm
- Location: In my Banana Yellow Space Shuttle...somewhere over Southern Caledonia
How do you get from the cabin to the engine bay?
E89 no sound generator…paddy wright wrote: ↑Wed Jan 03, 2024 4:38 pm There’s the hole through where the sound generator goes in I believe.
We choose to go to on with this endeavour at this time and do the other things, not because they are easy, but because they are hard…
A very modified Atacama Yellow 35is
A very modified Atacama Yellow 35is
- enuff_zed
- Lifer
- Posts: 14988
- Joined: Wed Oct 26, 2016 11:05 am
- Location: Attleborough, Norfolk
How do you get from the cabin to the engine bay?
Should be just beside WallaceB21 wrote: ↑Wed Jan 03, 2024 5:18 pmI’ll try and find a grommet..enuff_zed wrote: ↑Wed Jan 03, 2024 5:00 pm If you find a grommet that a loom goes through then take the outside part of a bic pen, push it through the grommet then feed the wire through.
Saves all the hassle with the wires folding back on themselves.
Of course, once through the grommet, take the pen off the wire again.
-
- Lifer
- Posts: 3434
- Joined: Tue Sep 29, 2020 10:37 pm
- Location: North Hampshire
How do you get from the cabin to the engine bay?
Presumably the E89 is the same as the E85/E86 in that the electronics box is located rear left of engine bay. Trace the main loom from here and you should find where it passes through the fire wall. You may find useful pictures by searching for cruise control retrofit on the N52.
2003 Maldives Blue 3.0i auto
Previously: Maldives Blue 2.5i manual (its back!) and another, and a Monaco Blue 3.0Si coupe
Previously: Maldives Blue 2.5i manual (its back!) and another, and a Monaco Blue 3.0Si coupe
- B21
- Lifer
- Posts: 5538
- Joined: Tue Oct 05, 2021 7:15 pm
- Location: In my Banana Yellow Space Shuttle...somewhere over Southern Caledonia
How do you get from the cabin to the engine bay?
Well you’re correct…sadly I persevered and discovered it the hard way..well it wasn’t that hard..I had a 50w led light in the footwell and I could see a glow in the engine bay…as you say the DME/Adaptive damper ECU box has a tunnel into the cabin near the main fuse box…Zedebee wrote: ↑Wed Jan 03, 2024 6:02 pm Presumably the E89 is the same as the E85/E86 in that the electronics box is located rear left of engine bay. Trace the main loom from here and you should find where it passes through the fire wall. You may find useful pictures by searching for cruise control retrofit on the N52.
Should have waited longer.,but thanks appreciated..
Bad news is that the cable harness is designed for LHD cars so not enough cable to reach both that box and the cluster…
I’ll put the boost sensor cabin side and run a pressure pipe to a tap off the OE boost sensor on the charge pipe..
- Attachments
-
- IMG_2334.jpeg (246.61 KiB) Viewed 435 times
-
- IMG_2333.jpeg (153.14 KiB) Viewed 435 times
-
- IMG_2332.jpeg (170.54 KiB) Viewed 435 times
-
- IMG_2331.jpeg (183.35 KiB) Viewed 435 times
We choose to go to on with this endeavour at this time and do the other things, not because they are easy, but because they are hard…
A very modified Atacama Yellow 35is
A very modified Atacama Yellow 35is