Anyone ‘lost’,cruise control?

[B21]

Another weird one..

I seem to have ‘lost’ cruise function sometime over the last couple of days..definitely working on Saturday…today..1,200 later no cruise..no error , no lights , nothing..not tried a code reader yet as still finishing off another NC500 trip..

[john-e89]

Another weird one..

I seem to have ‘lost’ cruise function sometime over the last couple of days..definitely working on Saturday…today..1,200 later no cruise..no error , no lights , nothing..not tried a code reader yet as still finishing off another NC500 trip..

Yes, it’s gone awol on my 35i for whatever reason, I thought it was because I hadn’t coded a new battery in but I’ve done that with Carly and still nothing, no error codes either, although Carly isn’t very good admittedly.

[B21]

Another weird one..

I seem to have ‘lost’ cruise function sometime over the last couple of days..definitely working on Saturday…today..1,200 later no cruise..no error , no lights , nothing..not tried a code reader yet as still finishing off another NC500 trip..

Yes, it’s gone awol on my 35i for whatever reason, I thought it was because I hadn’t coded a new battery in but I’ve done that with Carly and still nothing, no error codes either, although Carly isn’t very good admittedly.

OK in one sense good to know..

[john-e89]

Another weird one..

I seem to have ‘lost’ cruise function sometime over the last couple of days..definitely working on Saturday…today..1,200 later no cruise..no error , no lights , nothing..not tried a code reader yet as still finishing off another NC500 trip..

Yes, it’s gone awol on my 35i for whatever reason, I thought it was because I hadn’t coded a new battery in but I’ve done that with Carly and still nothing, no error codes either, although Carly isn’t very good admittedly.

OK in one sense good to know..

Let me know what your code reader says if you will please Peter,

[Ed Doe]

I realise it may be different in terms of operation to the E85/6, but on the off-chance it's as primitive...

When I first bought my M the Cruise wasn't working either. I also had an extremely sensitive throttle. After a bit of fault-finding, I traced it to a failed clutch switch which is in the pedal assembly. Replaced the Clutch switch and solved the throttle jumpiness, and the cruise came back too!

[AnubisZed]

Guys, I'm assuming when you press the stalk nothing comes up on the dash (LED around the speedo or between the clocks)?

If you end up with no error codes then I'd suspect that it's a faulty stalk, ie; there is no "fault" with the system, the system is just not receiving the signal to activate! BUT I wouldn't recommending just changing the individual stalk though I'd change the whole stalk assembly with the wiper and indicator stalks.

[B21]

Guys, I'm assuming when you press the stalk nothing comes up on the dash (LED around the speedo or between the clocks)?

If you end up with no error codes then I'd suspect that it's a faulty stalk, ie; there is no "fault" with the system, the system is just not receiving the signal to activate! BUT I wouldn't recommending just changing the individual stalk though I'd change the whole stalk assembly with the wiper and indicator stalks.

I checked with the ID4Motion user group on FB…apparently it happens along with the clock losing time …

Today on start up cruise came back…held a steady 75 down the M74 for 30 miles no issues..

So now just got to fix the clock losing a minute or so a day and some other idrive interface bugs..

I’ll knuckle down with some detailed fault reports when I have time..

[AnubisZed]

I checked with the ID4Motion user group on FB…apparently it happens along with the clock losing time …

Today on start up cruise came back…held a steady 75 down the M74 for 30 miles no issues..

So now just got to fix the clock losing a minute or so a day and some other idrive interface bugs..

I’ll knuckle down with some detailed fault reports when I have time..

Hmmm, interesting I remember now I had this on a couple of occasions on my Chinese digital cluster where the Cruise didn't work, another good reason to have my OE cluster back in

[B21]

I checked with the ID4Motion user group on FB…apparently it happens along with the clock losing time …

Today on start up cruise came back…held a steady 75 down the M74 for 30 miles no issues..

So now just got to fix the clock losing a minute or so a day and some other idrive interface bugs..

I’ll knuckle down with some detailed fault reports when I have time..

Hmmm, interesting I remember now I had this on a couple of occasions on my Chinese digital cluster where the Cruise didn't work, another good reason to have my OE cluster back in

Yes you can start to realise why companies like BMW have QA depts to iron out the bugs..

FWIW I discovered a MMI Mr 12 Volt feature whilst on then 500…

If you are looking at the OE map screen and then press track change on the MFSW then it pops you across to the Mr 12 volt setup…not found a way to toggle back …save pressing the nav button

[enuff_zed]

I seem to have ‘lost’ cruise function sometime over the last couple of days

You're in luck Peter, it's just been handed in at Inverness police station.

[B21]

I seem to have ‘lost’ cruise function sometime over the last couple of days

You're in luck Peter, it's just been handed in at Inverness police station.

Thank you…I lost in on the Crainlarich to Stirling road..once you’ve done your NC500 tour you’ll be at fait with our geography

Here’s Kinlochewe for you with Loch Marie

[enuff_zed]

I seem to have ‘lost’ cruise function sometime over the last couple of days

You're in luck Peter, it's just been handed in at Inverness police station.

Thank you…I lost in on the Crainlarich to Stirling road..once you’ve done your NC500 tour you’ll be at fait with our geography

Here’s Applecross for you

Sorry mate, not 'au fait' with foreign driving (but I have heard of Crianlarich - not sure where you were?) however given the paucity of polis up there (and UK in general tbh) it was probably the nearest station anyway.

[B21]

You're in luck Peter, it's just been handed in at Inverness police station.

Thank you…I lost in on the Crainlarich to Stirling road..once you’ve done your NC500 tour you’ll be at fait with our geography

Here’s Applecross for you

Sorry mate, not 'au fait' with foreign driving (but I have heard of Crianlarich - not sure where you were?) however given the paucity of polis up there (and UK in general tbh) it was probably the nearest station anyway.

When you come up for your visa to enter Scottish airspace I’ll update you

[enuff_zed]

Thank you…I lost in on the Crainlarich to Stirling road..once you’ve done your NC500 tour you’ll be at fait with our geography

Here’s Applecross for you

Sorry mate, not 'au fait' with foreign driving (but I have heard of Crianlarich - not sure where you were?) however given the paucity of polis up there (and UK in general tbh) it was probably the nearest station anyway.

When you come up for your visa to enter Scottish airspace I’ll update you

I have my own Visa, in the rather comely shape of a wee Kilmarnock lassie I found along the way.

[B21]

Sorry mate, not 'au fait' with foreign driving (but I have heard of Crianlarich - not sure where you were?) however given the paucity of polis up there (and UK in general tbh) it was probably the nearest station anyway.

When you come up for your visa to enter Scottish airspace I’ll update you

I have my own Visa, in the rather comely shape of a wee Kilmarnock lassie I found along the way.

Ahh..useful when it comes to getting a Scottish passport in due course…