Yesterday on my way home from work my engine management light came on and stayed on. There was no obvious effect on performance etc so I guessed it was just a simple O2 sensor fault or something similar. Anyway, I attached my diagnostic unit and it says there are no fault codes and nothing is outside it's tolerance. Despite this the light has remained on continually. I have tried to clear codes ( not that there are any ) and I disconnected the battery overnight. On reconnection the light came on again immediately. again I checked for faults and nothing is registered. I'm left wondering whether my control unit is toast or there's a short in the wiring somewhere. I'm only going to the stealer as a last resort so if anyone has any thoughts or suggestions let me know.
One last thing, I've lost the email address for Chris at Alpina in Germany. Anybody got it?