Hi folks
My Carver DSp amp in my 04 Z4 got damaged due to water egress in the boot. The amp was sent away for repair down to Colin in Basingstoke, but despite his efforts the amp is not working.
I am based in Scotland, can any suggest the cheapest way through this problem. Are there any good specialists in Scotland who may be able to undertake a repair\refit?
I am not an audiophile so am not looking for high end solution just a good working sound system. I am also not a techno wizard so am unable to do major surgery - just day surgery options please!
I did see on the forum a suggestion to "At the most basic, you could remove the factory amp and run everything off the head unit (just wire the "in and out" of the amp together so the speakers are tied directly to the head unit)" . Does anyone have thoughts on this and in layman's terms if possible how do I do this?
From what I can see failing this option I will need to replace the whole system, speakers and all! I am assuming this will be around £500 not sure if there is a cheaper option?
Any helps with this much appreciated
Ta
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Carver amp dead - now what?
-
- Newbie
- Posts: 31
- Joined: Tue Jan 10, 2012 12:23 pm
- Location: Falkirk
- Contact:
- bcworkz
- Senior Member
- Posts: 1740
- Joined: Wed May 04, 2011 10:56 pm
- Location: ǝɹǝɥ ƃuoɹʍ s,sƃuıɥʇǝɯos
Re: Carver amp dead - now what?
You don't need to cross post, (http://www.z4-forum.com/forum/viewtopic.php?f=2&t=41138) most regular members in a position to help you view via "New Posts" so would see your post no matter where you put it.
"The cause of most problems are solutions" (06 3.0si, sport pkg)
- mac27040
- Lifer
- Posts: 3511
- Joined: Wed Oct 26, 2011 5:17 pm
- Location: Shepshed
Re: Carver amp dead - now what?
3.0i SMG Supercharged,19" CSL, AvinUSA android 10.25” screen,DSP,M6 gearknob,Coilovers,Aero F-bumper,M r-bumper,Aero skirts,Facelift front & rear lights,M sports seats,Carbon Steering wheel,Intravee,Rervese cam,Hydrographics
-
- Newbie
- Posts: 31
- Joined: Tue Jan 10, 2012 12:23 pm
- Location: Falkirk
- Contact:
Re: Carver amp dead - now what?
Ok ta thanks for letting me know.bcworkz wrote:You don't need to cross post, (http://www.z4-forum.com/forum/viewtopic.php?f=2&t=41138) most regular members in a position to help you view via "New Posts" so would see your post no matter where you put it.