Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

New Rubber

Alloy wheels and tyre discussion
Post Reply
User avatar
ronk
Lifer
Lifer
Posts: 14229
Joined: Tue Feb 24, 2009 11:50 am
Location: Durham

New Rubber

Post by ronk » Thu Sep 14, 2023 11:16 pm

Ive just ordered a set of Michelin PS5 for the 35is
I’ve kept to the same width front and rear but gone 5% up on profile ie 225 /40/19 and 255/35/19

Now I’m wondering how or if this will affect my Insured warranty?

If anyone wants a pair of std Potenza runflats (225/35/19) that have not been driven over a kerb and with 6mm of tread, drop me a message!
You don't stop playing when you get old - You get old when you stop playing!
So I bought a 35is with all the toys to play with. :thumbsup:

User avatar
1536Z4
Senior Member
Senior Member
Posts: 1636
Joined: Thu Nov 19, 2020 9:37 pm
Location: North Shropshire

New Rubber

Post by 1536Z4 » Fri Sep 15, 2023 8:16 am

ronk wrote: Thu Sep 14, 2023 11:16 pm Ive just ordered a set of Michelin PS5 for the 35is
I’ve kept to the same width front and rear but gone 5% up on profile ie 225 /40/19 and 255/35/19

Now I’m wondering how or if this will affect my Insured warranty?

If anyone wants a pair of std Potenza runflats (225/35/19) that have not been driven over a kerb and with 6mm of tread, drop me a message!

I shouldn`t think so but always best to inform them . Plus you get peace of mind :thumbsup:
Montego Blue E86 . MILV`s . Simpson Custom Manifold Race Exhaust . xHP transmission stage 3 . VT engine mounts . BC RA coilovers . H&R arbs . Adjustable rear camber arms . Ultra Racing front strut brace . Drexler LSD .

Online
User avatar
B21
Lifer
Lifer
Posts: 5466
Joined: Tue Oct 05, 2021 7:15 pm
Location: In my Banana Yellow Space Shuttle...somewhere over Southern Caledonia

New Rubber

Post by B21 » Fri Sep 15, 2023 8:52 am

ronk wrote: Thu Sep 14, 2023 11:16 pm Ive just ordered a set of Michelin PS5 for the 35is
I’ve kept to the same width front and rear but gone 5% up on profile ie 225 /40/19 and 255/35/19

Now I’m wondering how or if this will affect my Insured warranty?

If anyone wants a pair of std Potenza runflats (225/35/19) that have not been driven over a kerb and with 6mm of tread, drop me a message!
Technically you’ve changed the car from its published design criteria so that’s a definite requirement to inform them…what their response is up to them..
We choose to go to on with this endeavour at this time and do the other things, not because they are easy, but because they are hard…
A very modified Atacama Yellow 35is :thumbsup:

User avatar
ronk
Lifer
Lifer
Posts: 14229
Joined: Tue Feb 24, 2009 11:50 am
Location: Durham

New Rubber

Post by ronk » Mon Sep 18, 2023 7:11 pm

The new rubber is fitted and the car feels very very different!

I will get a few miles into them before pushing on. The steering input at very low speeds seems much lighter, driving at normal speed the steering weight feels no different.

The previous run flats are ok but I was horrified at the condition inside the rear tyres (near side and off side) the inner wall on both tyres have a continuous split around the circumference roughly where the side wall meets the tread area - it looks like the tyre has been used flat - it has not
A visual inspection would have given the thumbs up as there is no visible damage on the outside.

I find that disturbing as last week I was doing motorway speeds for three hours continuously.
You don't stop playing when you get old - You get old when you stop playing!
So I bought a 35is with all the toys to play with. :thumbsup:

Online
User avatar
B21
Lifer
Lifer
Posts: 5466
Joined: Tue Oct 05, 2021 7:15 pm
Location: In my Banana Yellow Space Shuttle...somewhere over Southern Caledonia

New Rubber

Post by B21 » Mon Sep 18, 2023 10:59 pm

ronk wrote: Mon Sep 18, 2023 7:11 pm The new rubber is fitted and the car feels very very different!

I will get a few miles into them before pushing on. The steering input at very low speeds seems much lighter, driving at normal speed the steering weight feels no different.

The previous run flats are ok but I was horrified at the condition inside the rear tyres (near side and off side) the inner wall on both tyres have a continuous split around the circumference roughly where the side wall meets the tread area - it looks like the tyre has been used flat - it has not
A visual inspection would have given the thumbs up as there is no visible damage on the outside.

I find that disturbing as last week I was doing motorway speeds for three hours continuously.
Welcome to the enlightened club…it’s the single biggest chassis change you can do on an E89…

The issue with your rear tyres is that you haven’t driven around enough corners hard enough to even up the wear…

E89s carry so much rear camber that if you just drive in straight lines then the rear shoulders always wear badly..

You can tell from multiple MOTs what type of driving has been done based on exactly that scenario..
We choose to go to on with this endeavour at this time and do the other things, not because they are easy, but because they are hard…
A very modified Atacama Yellow 35is :thumbsup:

User avatar
ronk
Lifer
Lifer
Posts: 14229
Joined: Tue Feb 24, 2009 11:50 am
Location: Durham

New Rubber

Post by ronk » Tue Sep 19, 2023 12:00 am

Looking forward to my usual drive to the Borders next week

I will be more than happy to eat my large slice of humble pie. I used to think the RF were ok (ish) so prepare the custard!


The RF on the Z4 have some scary circumferential internal splits
The 335 had two tyres that developed blebs long before worn

The tyres have never been mistreated ie always properly inflated and never driven on or off kerbs

Very poor quality.
You don't stop playing when you get old - You get old when you stop playing!
So I bought a 35is with all the toys to play with. :thumbsup:

User avatar
ronk
Lifer
Lifer
Posts: 14229
Joined: Tue Feb 24, 2009 11:50 am
Location: Durham

New Rubber

Post by ronk » Thu Sep 21, 2023 12:51 pm

B21 wrote: Fri Sep 15, 2023 8:52 am

Technically you’ve changed the car from its published design criteria so that’s a definite requirement to inform them…what their response is up to them..
I connected bmw insured warranty and they said that they were not bothered about the fitting of non runflats - however if the 5% Profile had affected an insured component at a claim, then it would not be covered. I asked for an example and they couldn’t give me such an example.

Their suggestion was to ask my local dealership if a 5% increase was acceptable. Basically they have put the onus on the dealership to make a decision for them which I don’t think is very fair.

Until the service manager contacts me I would say that’s a definite maybe!
You don't stop playing when you get old - You get old when you stop playing!
So I bought a 35is with all the toys to play with. :thumbsup:

Post Reply