Today i finally got round to fitting my aux-in lead which i had taken out of the roadster before it went,anyhow i thought it would be a simple job vents out,radio out,lead in and then to see if it worked BUT no!.The coupe has B/tooth fitted so where the aux-in should have gone there was another connector so i thought that was it job stopped.
The connector in the back of the radio and the connector on the aux-in lead are identical so with aid of a small screwdriver removed the pins from the aux-in lead then replaced them into the corresponding holes of the connector in the back of the radio well on the second attempt i did got them the wrong way round on the first attempt i was holding the plug upside down
I refitted the connector blocks to the back of the radio to check everything was ok radio worked,CD worked Aux worked and most importantly the B/tooth still worked which it did
The only downside i drilled the hole in the panel under the heater controls, but put the hole at the top of the panel rather than the bottom. So if anyone has a spare lying around in black i'll be happy to take it of your hands
So all and all i'm feeling very pleaded with myself for overcoming that problem.
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Aux-in plus Bluetooth
- Redzedfour
- Lifer
- Posts: 3085
- Joined: Sat Aug 22, 2009 5:11 pm
- Location: Land of the Prince Bishops