Monkey mans power adder

ph001 · Post by **ph001** » Sun May 12, 2019 8:54 pm

Ah! Nice to see a bit of progress on this again

Machine monkey · Post by **Machine monkey** » Mon May 13, 2019 10:07 am

ph001 wrote: ↑Sun May 12, 2019 8:54 pm Ah! Nice to see a bit of progress on this again

Yeah it’s been on hiatus long enough. A things have changed so hopefully I can finish this now. Can’t wsit to see how much power it will make?!

ph001 · Post by **ph001** » Mon May 13, 2019 10:44 am

Pretty incredible journey - over 2 years from the first post! All the newer members should take an afternoon to read through all this from day one. It's like an epic engineering novel!

Machine monkey · Post by **Machine monkey** » Mon May 13, 2019 10:58 am

ph001 wrote: ↑Mon May 13, 2019 10:44 am Pretty incredible journey - over 2 years from the first post! All the newer members should take an afternoon to read through all this from day one. It's like an epic engineering novel!

It is like a novel this post! A lot of ups and downs like a good book to.

LittleZ4 · Post by **LittleZ4** » Mon May 13, 2019 3:30 pm

Thank God this is still on track.......

Machine monkey · Post by **Machine monkey** » Mon May 13, 2019 10:06 pm

LittleZ4 wrote: ↑Mon May 13, 2019 3:30 pm Thank God this is still on track.......

Thanks that sh1t is good to hear and motivational

LittleZ4 · Post by **LittleZ4** » Mon May 13, 2019 10:26 pm

I absolutely 100% need to see this finished mate, it's an epic build. If I keep the Z4 then this will be the inspiration to have it boosted

Machine monkey · Post by **Machine monkey** » Tue May 14, 2019 1:15 pm

LittleZ4 wrote: ↑Mon May 13, 2019 10:26 pm I absolutely 100% need to see this finished mate, it's an epic build. If I keep the Z4 then this will be the inspiration to have it boosted

If you go boosted I can put you on to a guy that sells and installed a great kit.

LittleZ4 · Post by **LittleZ4** » Tue May 14, 2019 6:59 pm

Machine monkey wrote: ↑Tue May 14, 2019 1:15 pm
LittleZ4 wrote: ↑Mon May 13, 2019 10:26 pm I absolutely 100% need to see this finished mate, it's an epic build. If I keep the Z4 then this will be the inspiration to have it boosted
If you go boosted I can put you on to a guy that sells and installed a great kit.

I could be quite interested in that!

Machine monkey · Post by **Machine monkey** » Tue May 14, 2019 8:19 pm

So this started!!

: 00BA14C9-70A6-40C6-B72B-DD57F875480F.jpeg (400.09 KiB) Viewed 707 times

: F839C747-DB65-4574-BE0E-B20515C27E68.jpeg (411.21 KiB) Viewed 707 times

: 774CA769-8152-4EEF-BE6D-C57A28B32865.jpeg (353.13 KiB) Viewed 707 times

: 41E4D975-2117-4FF2-BE4A-D0D3B78A0869.jpeg (236.02 KiB) Viewed 707 times

: E014586E-AEBB-4B9E-BEEA-AC27A2113590.jpeg (247.32 KiB) Viewed 707 times

: C77FB29B-7F64-4BAF-8F34-F398C759B1F0.jpeg (336.82 KiB) Viewed 707 times

Machine monkey · Post by **Machine monkey** » Tue May 14, 2019 8:58 pm

LittleZ4 wrote: ↑Tue May 14, 2019 6:59 pm
Machine monkey wrote: ↑Tue May 14, 2019 1:15 pm
LittleZ4 wrote: ↑Mon May 13, 2019 10:26 pm I absolutely 100% need to see this finished mate, it's an epic build. If I keep the Z4 then this will be the inspiration to have it boosted
If you go boosted I can put you on to a guy that sells and installed a great kit.

I could be quite interested in that!

Alexander hopwood of Hopwood motorsport

Doddsy · Post by **Doddsy** » Wed May 15, 2019 4:55 pm

It just gets better and better. Are you cutting the bottom section off the blue bumper and stitching it to the top of your z4 bumper?

Machine monkey · Post by **Machine monkey** » Wed May 15, 2019 6:38 pm

Doddsy wrote: ↑Wed May 15, 2019 4:55 pm It just gets better and better. Are you cutting the bottom section off the blue bumper and stitching it to the top of your z4 bumper?

Yeah something like that! I haven’t figured that out yet!

Machine monkey · Post by **Machine monkey** » Wed May 15, 2019 6:40 pm

Spent a bit more time on the front wheel arch today. In total I only have about 2 hours in this. And it fits better than the Z4 rears made for my car!!

: 2C935545-3A83-4905-9A99-B32846B1BCC8.jpeg (451.47 KiB) Viewed 656 times

: 7D9B2565-BC35-4BB8-B433-46C6F1464810.jpeg (481.75 KiB) Viewed 656 times

: 858AFBCD-E70C-4025-875F-43FB046CADBD.jpeg (508.79 KiB) Viewed 656 times

: 8AD0851A-F02C-4B25-A216-51BD7A1606D4.jpeg (399.23 KiB) Viewed 656 times

Not to shabby to say they where made to fit a 90s Nissan!!

LittleZ4 · Post by **LittleZ4** » Sat Jul 27, 2019 7:15 am

Hows the progress going on this? I may well be in receipt of a turbo kit this coming week

Just trying to read through as much as I can now lol. The ecu side of things is baffling!!

Z4-forum.com

Z4-forum.com