>

Custom Cruise Control Loom

VRSteve said:
Any update to these??

Would really like one!!!

Thanks!
Click to expand...

Thought I’d sent you a pm at the weekend :?

Can certainly make you one up. Think I’m up to date now.
 
Hello, I have a face-lift Z4, so >2006, my understanding is that any stalk from any year E85 will fit, if I have the correct loom from you. Can you please confirm ?
Danke
 
saseinlinie said:
Hello, I have a face-lift Z4, so >2006, my understanding is that any stalk from any year E85 will fit, if I have the correct loom from you. Can you please confirm ?
Danke
Click to expand...

That's correct, and stalk from an E85/6
 
Hi srhutch
Wired in loom yesterday, no problems at all, it took about 40 minutes,, picked up new stalk this morning from Sytner BMW.
Fitted stalk on garage forecourt about 40 seconds
Used CC immediately on the way home
Brilliant 👍👍
Thanks again for your help 😬
 

Attachments

  • 292D73F3-FC2F-49EB-B900-08101827CC3A.jpeg
    292D73F3-FC2F-49EB-B900-08101827CC3A.jpeg
    231.4 KB · Views: 11,045
Just to advise that I’m up to date with looms so if anybody wants to order let me know.

I tend to make up at weekends and post out on Mondays.
 
Finally got round to doing this today. Followed the extra instructions and didn't refer to the original BMW ones at all. The labels on each wire made everything idiot proof. Great job srhutch!

Additional tips... Someone earlier mentioned that he did it without removing the glove box. I tried it, and it was bloody impossible to feed the blue wire across, maybe because I had lots of extra wires from my camera and gauges taking up space back there. Removing the glove box takes 5 mins and makes it such a breeze. I also used a zip tie as a guide to feed the blue wire through the bulk head.
 
Thanks for the update :thumbsup:

I don’t remove the glovebox. Just use a piece of stiffish wire to feed through, same as through bulkhead. But as you say removal of glovebox doesn’t take long if that’s the preferred route.
 
Hey,

Anybody in Leeds up for helping me fit this in exchange for beer money?
I've spent the morning reading the instructions and have now chickened out.

Thanks,
Chris
 
355Chris355 said:
Hey,

Anybody in Leeds up for helping me fit this in exchange for beer money?
I've spent the morning reading the instructions and have now chickened out.

Thanks,
Chris
Click to expand...

Which bit worries you?
 
Quick question... are there any indications on the dash when cruise control is engaged? I don't see anything on mine but it's definitely working.
 
srhutch said:
355Chris355 said:
Hey,

Anybody in Leeds up for helping me fit this in exchange for beer money?
I've spent the morning reading the instructions and have now chickened out.

Thanks,
Chris
Click to expand...

Which bit worries you?
Click to expand...

I’m with Chris, All of it :scratchhead:
 
2dogs said:
srhutch said:
355Chris355 said:
Hey,

Anybody in Leeds up for helping me fit this in exchange for beer money?
I've spent the morning reading the instructions and have now chickened out.

Thanks,
Chris
Click to expand...

Which bit worries you?
Click to expand...

I’m with Chris, All of it :scratchhead:
Click to expand...

It really isn’t hard Terry. Surely Number5 could help you.
 
You must log in or register to reply here.
Back
Top Bottom